background image

4 • NITRO RUSTLER

This model is not intended 
for use by children under 
16 years of age without the 
supervision of a responsible 
and knowledgeable adult.

All instructions and 
precautions outlined in this 
manual should be strictly 
followed to ensure safe 
operation of your model.

SafETY PREcaUTIONS

All of us at Traxxas want you to safely enjoy your new Nitro Rustler. Operate 
your Nitro Rustler sensibly and with care, and it will be exciting, safe, and fun 
for you and those around you. Failure to operate your Nitro Rustler in a safe 
and responsible manner may result in property damage and serious injury. 
The precautions outlined in this manual should be strictly followed to help 
ensure safe operation. You alone must see that the instructions are followed 
and the precautions are adhered to. 

ImPORTaNT POINTS TO REmEmBER

• Nitro Rustler is very fast! The Nitro Rustler is intended for experienced users 

with a high level of skill. The TRX 2.5 Racing Engine is extremely powerful and 
may require skilled driving to maintain control. Children under 16 years of 
age and inexperienced drivers should not operate the Nitro Rustler without 
the supervision of a responsible and knowledgeable (experienced) adult.

• 

Model engine fuel is dangerous and highly poisonous.

 

Always follow all 

directions and precautions printed on the fuel container. Model engine fuel 
is poisonous to humans and animals. Drinking the fuel can cause blindness 
and death. Handle with care and respect.

• Model engine fuel, especially when in a fuel dispensing bottle, may look like 

a cool drink to a child.

 

Keep all fuel out of the reach of children at all times. 

Do not place fuel containers on the ground where children can reach 
them while you are driving.

• Model engine fuel is flammable. Never allow smoking, sparks, heat, or flame 

in the presence of fuel or fuel vapors.

• The engine, brakes, and exhaust system may become extremely hot during 

use. Be careful not to touch these parts, especially when refueling or 
stopping the engine.

• Prolonged exposure to the engine exhaust can be harmful. Avoid breathing 

the engine exhaust. Always run your Nitro Rustler outdoors, in a well-
ventilated area. Never run the engine indoors.

• Do not operate your Nitro Rustler at night, or anytime your line of sight to 

the model may be obstructed or impaired in any way.

• Never operate your Nitro Rustler in crowds of people or busy pedestrian 

areas. Nitro Rustler is very fast  and could cause injury to those unaware of its 
presence. Keep small children at a safe distance away from the operating area.

• Because Nitro Rustler is controlled by radio, it is subject to radio interference 

from many sources beyond your control. Since radio interference can cause 
momentary loss of control, always allow a safety margin in all directions 
around your model to prevent collisions. 

• The engine can be loud. If the noise makes you uncomfortable, wear ear 

protection. Be considerate of your neighbors by not running your model 
early in the morning or late in the evening.

• Do not kink the antenna wire. Kinks in the antenna wire will reduce range.
• Do not cut the antenna “stinger” or any other part of the antenna wire. 

Cutting the antenna will reduce range.

• You must extend the antenna wire in the model as far as possible for 

maximum range. In doing so, the antenna wire will be extended outside 
of the vehicle body. Do not wrap or coil the antenna wire to keep it from 
extending out of the body.

• Do not allow the antenna wire to extend outside the body without the 

protection of an antenna tube, or the antenna wire may incur crash damage 
that could reduce range.

• 

Most importantly, use good common sense at all times.

BaTTERIES aNd BaTTERY chaRGING

Your model uses rechargeable batteries that must be handled with care for 
safety and long battery life. Make sure to read and follow all instructions and 
precautions that were provided with the battery packs and your charger. It 
is your responsibility to charge and care for the battery packs properly. In 
addition to your battery and charger instructions, here are some more tips to 
keep in mind.
• Use the supplied charger to charge the included battery. See “Charging the 

EZ-Start Battery” on page 22. 

• Never leave batteries to charge unattended.
• Allow the battery pack to cool off before charging.
• Do not use battery packs that have been damaged in any way.
• Do not use battery packs that have damaged wiring, exposed wiring, or a 

damaged connector. 

• Children should have responsible adult supervision when charging and 

handling batteries.

• Only use approved chargers for NiMH battery packs (such as Part #2921 or 

the Traxxas EZ-Peak Plus, Part #2933). Do not exceed the maximum charge 
rate of 1 amp.

• Do not short-circuit the battery pack. This may cause burns and severe 

damage to the battery pack.

• Do not burn or puncture the batteries. Toxic materials could be released. If 

eye or skin contact occurs, flush with water.

• Store the battery pack in a dry location, away from heat sources  

and direct sunlight.

• Nickel-metal hydride (NiMH) batteries must be recycled or disposed  

of properly.  

Recycling Your Traxxas Power Cell NiMH Battery

Traxxas strongly encourages you to recycle your Power Cell battery when it 
has reached the end of its useful life. 

Do not throw your battery in the trash.

 

All Power Cell battery packs display the RBRC (Rechargeable Battery Recycling 
Corporation) icon, indicating they are recyclable. To find a recycling center near 
you, ask your local hobby dealer or visit www.call2recycle.org.

Previous experience with 
radio controlled models is 
mandatory. These models 
are capable of high speeds, 
requiring experienced 
driving control. Models 
require detailed setup, 
and/or maintenance 
procedures with required 
support equipment.

1

Summary of Contents for 44094-1 Nitro Rustler





































Reviews: