background image

E-MAXX • 3

BEFORE YOU PROCEED

Carefully read and follow all instructions in this and any 
accompanying materials to prevent serious damage to your  
model. Failure to follow these instructions will be considered  
abuse and/or neglect.
Before running your model, look over this entire manual and 
examine the model carefully. If for some reason you decide it is not 
what you wanted, then do not continue any further. 

Your hobby 

dealer absolutely cannot accept a model for return or exchange 
after it has been run.

Warnings, Helpful Hints, & Cross-References

Throughout this manual, you’ll notice warnings and helpful hints 
identified by the icons below. Be sure to read them!

An important warning about personal safety or avoiding
damage to your model and related components. 

Special advice from Traxxas to make things easier  
and more fun.

Refers you to a page with a related topic.

SUPPORT

If you have any questions about your model or its operation, 
call the Traxxas Technical Support line toll-free at: 

1-888-TRAXXAS (1-888-872-9927)

*

Technical support is available Monday through Friday from 8:30am 
to 9:00pm central time. Technical assistance is also available at 
Traxxas.com. You may also e-mail customer support with your 
question at [email protected]. Join thousands of registered 
members in our online community at Traxxas.com.
Traxxas offers a full-service, on-site repair facility to handle any  
of your Traxxas service needs. Maintenance and replacement  
parts may be purchased directly from Traxxas by phone or online  
at BuyTraxxas.com. You can save time, along with shipping  
and handling costs, by purchasing replacement parts from your  
local dealer.
Do not hesitate to contact us with any of your product support needs. 
We want you to be thoroughly satisfied with your new model!

SAFETY PRECAUTIONS

All of us at Traxxas want you to safely enjoy your new model. Operate 
your model sensibly and with care, and it will be exciting, safe, and fun 
for you and those around you. Failure to operate your model in a safe 
and responsible manner may result in property damage and serious 
injury. The precautions outlined in this manual should be strictly 
followed to help ensure safe operation. You alone must see that the 
instructions are followed and the precautions are adhered to. 

IMPORTANT POINTS TO REMEMBER

• Your model is not intended for use on public roads or congested areas where 

its operation can conflict with or disrupt pedestrian or vehicular traffic.

• Never, under any circumstances, operate the model in crowds of 

people. Your model is very fast and could cause injury if allowed to 
collide with anyone.

• Because your model is controlled by radio, it is subject to radio 

interference from many sources that are beyond your control. Since 
radio interference can cause momentary losses of radio control, 
always allow a safety margin in all directions around the model in 
order to prevent collisions. 

• The motors, batteries, and speed control can become hot during use. 

Be careful to avoid getting burned.  

• Don’t operate your model at night, or anytime your line of sight to the 

model may be obstructed or impaired in any way.

• 

Most importantly, use good common sense at all times.

BATTERIES AND BATTERY CHARGING

Your model uses rechargeable batteries that must be handled with 
care for safety and long battery life. Make sure to read and follow all 
instructions and precautions that were provided with your battery 
packs and your charger. It is your responsibility to charge and care for 
your battery packs properly. In addition to your battery and charger 
instructions, here are some more tips to keep in mind.
• Never leave batteries to charge unattended.
• Remove the batteries from the model while charging.
• Always unplug the batteries from the electronic speed control when 

the model is not in use and when it is being stored or transported.

• Allow the battery packs to cool off between runs (before charging).
• Children should have responsible adult supervision when charging 

and handling batteries.

• Do not use battery packs that have been damaged in any way.
• Do not use battery packs that have damaged wiring, exposed wiring, 

or a damaged connector. 

• Only use approved chargers for NiMH battery packs (such as the  

Traxxas EZ-Peak

 Charger, Part #2930). Do not exceed the maximum 

charge rate of 4 amps.

Traxxas
1100 Klein Road
Plano, Texas 75074
Phone: 972-265-8000
Toll-free 1-888-TRAXXAS

Internet
Traxxas.com
E-mail: [email protected]

Entire contents ©2012 Traxxas. 
Traxxas, Ready-To-Race, Ready-
To-Win, E-Maxx and ProGraphix 
are trademarks or registered 
trademarks of Traxxas. Other 
brand names and marks are 
the property of their respective 
holders and are used only for 
purposes of identification. No 
part of this manual may be 
reproduced or distributed in print 
or electronic media without the 
express written permission of 
Traxxas. Specifications are subject 
to change without notice.

*Toll-free support is available to U.S. residents only.

Summary of Contents for 39036 E-Maxx

































Reviews: