WWW.TRAXONTECHNOLOGIES.COM
WWW.OSRAM.US/TRAXON
ª
TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT™ ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS,
JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
9
RI
3URGXFW6SHFLILFDWLRQ
OSRAM GmbH, Karl-Schurz-Str. 38, 33100 Paderborn, Germany
Media Wall Paper RGB 50 144PXL
Mounting
Mounting Accessories
TX CONNECT Smart IN Adapter Media Wall Paper Black Micro
- needed for cable-to-MWP interface
TX CONNECT Smart OUT Adapter Media Wall Paper Black Micro
- needed for MWP-to-cable interface
TX CONNECT Smart Extension Connector Media Wall Paper Black / White
- 3 connectors are needed for each interface (cable-to-MWP, MWP-to-cable, MWP-to-MWP)
Velcro Strip roll (hook-and-loop tape, white/ black)
Mounting
! Do not hold the MWP at the Input or Output port !
• Preparation:
Clean the mounting surface of grease and dust. The surface should be dry and clean when attaching the hook-and-loop tape.
• Cutting
(optional):
Trim the Media Wall Paper to the desired shape. See page 9 for the cutting plan details, cutting guideline and further instructions.
• Mounting - requires two persons:
1. Attach the self-adhesive hook-and-loop tape at the rear side: Fasten both the hook-and-loop tape sides together on the MWP with the softer side
on the MWP. Fasten the tape around the perimeter and vertically twice as shown in the illustration. Avoid double layer to prevent an uneven
surface of the Media Wall Paper.
2. Clip three TX CONNECT Smart Extension Connectors to each Input port
(ADD1, ADD2, ADD3, and ADD4 as required).
3. Remove the backing paper of all tapes on all MWP.
4.
.PVOUUIFåSTU.81 "%%POUPUIFTVSGBDF"UUBDIUIF.81DPNQMFUF
with the hook-and-loop tape onto the prepared surface using light gentle
pressure to ensure the hook-and-loop tape is fastened evenly. Apply
evenly from the Input port outwards.
5. Let a second person hold the next in line MWP (ADD2). Do not hold the
MWP at the Input or Output port. Connect the next in line MWP (ADD2) to
the preceding MWP (ADD1): attach the Connectors at the Input port of the
next in line MWP (ADD2) to the Output port of the preceding MWP (ADD1).
6. Mount the next in line MWP (ADD2) onto the surface: Attach the MWP
complete with the hook-and-loop tape onto the prepared surface using
light gentle pressure to ensure the hook-and-loop tape is fastened evenly.
Apply evenly from the Input port outwards.
7. Repeat steps 5 and 6 for each further MWP and mount all MWP. Please
consider the right adressing order.
8. Attach all required TX CONNECT Smart Adapter and TX CONNECT Smart cables to the mounted Media Wall Papers.
• Diffusor
(optional):
When using diffusors, keep a recommended distance from the diffusor to the luminaire of 6mm / 0.2
”
.
Hook-and-loop tape
Rear view
287387
INP
87
(48$/
(48$/
(48$/
IN
OUT
