Traxon Mood Light Classic, Operation Manual

Page: 8 / 49

0 9
MOOD-LIGHT FUNCTIONS
A) Color Mode
You can create and save any color combination for each or all of the four Mood-Light unit sections.
By changing the intensity of the three primary colors red, green, blue you can blend unlimited secondary colors for your Mood-
Light.
1) Create a Color Combination
All four unit section adjustment:
Press
CENTRE BUTTON on your remote control to create one color for all four Mood-Light unit sections. All four Mood-
Light unit sections will blink once in acknowledgement of the command from your remote.
Single unit section adjustment:
Press any of the four Mood-Light unit sections
(segment 01) or (segment 02) or (segment 03) or (segment 04)
on your remote control to chose any individual unit section for which you want to create a color. The selected Mood-
Light unit section will blink once in acknowledgement of the command from your remote.
Once you have selected to either adjust all four unit sections or just one, you can proceed to adjust the color as follows:
Press RED (+) or (-) to increase or decrease the intensity of the red color.
Press GREEN (+) or (-) to increase or decrease the intensity of the green color.
Press BLUE (+) or (-) to increase or decrease the intensity of the blue color.
See Illustration 1 (Color Chart Subtractive), page 26
See Illustration 2 (Color Chart Additive), page 26
Mix Chart: Magenta = mix Blue and Red
Yellow = mix Green and Red
Cyan = mix Green and Blue
White = evenly mix Red, Green and Blue
To return to the default Color Mode at any time, press CENTRE BUTTON on your remote control; this will reset any
previous setting you may have made. You can then proceed to adjust all sections or individual sections as described above.