www.traxontechnologies.com
©2015 tRAxOn teCHnOLOGies - An OsRAM Business. ALL RiGHts ReseRved. tRAxOn™, tx COnneCt®, ARe tRAdeMARks Of tRAxOn teCHnOLOGies. u.s. pAtents, e.u.
pAtents, jApAn pAtents, OtHeR pAtents pendinG. speCifiCAtiOns ARe suBjeCt tO CHAnGe witHOut nOtiCe.
installation Guide
06/15 v0.1
8 of 15
On-Site Installation
2.3
ip failure induced by stressed/damaged cables during or after installation
•
will not be under warranty by traxon technologies.
ALwAys keep the cables protected from sharp objects and ensure no
•
damage is generated on the cable.
failure to keep Cove Light AC HO RGB Grazes within the operating
•
temperature range of –20°C to +45°C (–4°f to +113°f) and storage
temperature range of –40°C to +70°C (–40°f to +158°f) will void the
product’s warranty.
Wall Installation
2.3.1
unplug the end cap from data injector and mount it.
1.
unplug end Cap
fiG.7:
DATA
OUT
TO FIXTURE
AC IN
DAT
A IN
Make sure power is off. Connect the starter cable to the AC in port and Rj45 cable to
2.
dAtA in port of data injector box. Connect the interconnection Cable to the tO fixtuRe
port. Connect dAtA Out to other data injector box.
Connect interconnection Cable and starter Cable
fiG.8:
end Cap
Rj45
interconnection Cable
starter Cable
Data Injector
AC In ~
DMX In
DMX Out
RJ45 connection
Female connector
Male connector
Use end cap for final
fixture in chain
TO FIXTURE
AC IN
DATA IN
DATA OUT
