Traxon Allegro Tube Mono Installation Manual Download Page 12 | Manualshive

Page: 12 / 19

background image

www.traxontechnologies.com

©2020 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Installation Guide

IG0105EN V2.0 03/20

P. 12 of 19

3. SYSTEM CONFIGURATION

3.1 Allegro Tube Mono Connection Components

The Allegro Tube Mono is connected using a daisy chain system with power and data on the
same cable. FIG 8 shows some typical components for the Allegro Tube Mono System.

FIG.8: Connection Components for Allegro Tube Mono System

Optional
DMX2PWM 3CH Dimmer

Starter Cable
TU.AC.0800000-Allegro Tube Mono Starter Cable (Open Wire), 3m
TU.AC.0900000-Allegro Tube Mono Starter Cable (Open Wire), 10m
AWG 17x 2C

TU.AC.1000000-
Connector End Cap

HLG-100H-48-LED Engine 100W 48V Outdoor
HLG-240H-48-LED Engine 240W 48V Outdoor
HLG-480H-48-LED Engine 480W 48V Outdoor

T-Starter Cable
TU.AC.0700000-Allegro Tube Mono T-Starter Cable (Open Wire), 0.6m
AWG 14 x 2C

Optional
DMX2PWM 9CH Dimmer

«
...
10
11
12
13
14
...
»

Summary of Contents for Allegro Tube Mono




















Reviews:

No comments

Related manuals for Allegro Tube Mono

Brand: OfiTE Pages: 21

Brand: Earthlite Pages: 4

Brand: YATEK Pages: 78

Brand: ParaBody Pages: 6

Brand: Sailmon Pages: 10

Brand: B&W Tek Pages: 12

Brand: b&o Pages: 46

Brand: Dairyland Pages: 5

Brand: Quark-Elec Pages: 2

Brand: JTECH Medical Pages: 8

Brand: Synthetic Sound Labs Pages: 12

Brand: Skytrofa Pages: 35

Brand: Hammer Pages: 21

Brand: TECshow Pages: 22

Brand: Nuvo Pages: 2

Brand: unix Corporation Pages: 6

Brand: Delfield Pages: 24

Brand: Conrad Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands