4
B. Printing the negative
Using a laser printer
1. Print using the TRAXX polyester sheets A4.
2. In case black is not strong enough, use the TRAXX toner density enhancer spray
to darken the film.
3. Your negative must be black and opaque. The black part prevents the
UV light from hardening the gel. The clear part (letters, logos, etc.) allows
the light to go through and create the stamp.
Using an inkjet printer
1. Find the best printer setting for optimum black printing.
2. Use suitable TRAXX inkjet sheets (not included in the box)
3. Your negative must be black and opaque. The black part prevents the
UV light from hardening the gel. The clear part (letters, logos, etc.) allows
the light to go through and create the stamp.
Tips & Tricks
1. If you can see through the black area of your negative when held up
to the light, then the negative will not work. You must select a different
printer setting and make sure you are using the appropriate printing film.
2.You can improve / darken the black on your negatives using the
TRAXX density enchancer spray
(Only works with negatives printed on a
laser printer).
