14
1.4 After Deploying
When the camera is back on deck, the recording can be stopped and the
camera must be dismounted from the trawl and rinsed with fresh water,
before the camera is connected to a computer, where the recordings can be
handled.
Stop Recording
To stop the recording, follow these steps:
Turn on the remote control by pressing
On/Scan
.
1 2 3 4 > 5 < 6 7 8
X
The camera and the remote are connected when an arrow is
pointing towards a number on the display. This is the number of
your camera.
press
Record/Stop
to stop recording.
Dismounting and rinsing
To dismount the camera, cut or untie rope. Keep the Start-Plug on the
camera during rinsing.
To remove sea water and organic matter from the camera, place the camera
upright with the Start Plug up – beware of the lens.
Rinse with fresh water through the hole around the Start Plug for 3 minutes.
After rinsing, remove the Start Plug.
To ensure long product life the rinsing must be done after each
deployment.
Summary of Contents for Colour
Page 1: ...Manual TrawlCamera ...
