15
Connect to a computer
To connect the camera to a computer, the following items are needed: The
TrawlCamera, Connection Box, Ethernet Cable and a computer with a
TrawlCamera Laptop and TrawlCamera Video Player installed (see section
1.7 for more details).
Connect the Connection box to the camera, as illustrated in section
1.1 – The 13pin connector fits only in one angle.
Connect the Ethernet cable to the network connector on the
Connection Box and the network connector on the computer. To
avoid any network conflict, we recommend that any alternative
network (cabled or wireless) is disabled during this process.
Turn on the switch on the Connection Box, to start the camera. It
may take up to one minute to start up. The camera is ready when
the light flashes.
The camera may be charged at the same time, by connecting the Power
Supply to the DC socket on the Connection Box. The switch on the
Connection Box has no impact on the charging process. The charger will
light up red while charging and green when the camera is fully charged. If
there is no light on the Power Supply, there is no power on it.
Summary of Contents for Colour
Page 1: ...Manual TrawlCamera ...
