P
AGE
24
M
AINTAINING
Y
OUR
A
PPLIANCE
(C
ONTINUED
)
Baffle Removal and Replacement Instructions (continued)
All of the baffle components are removable to facilitate easy cleaning and repairs. Make sure the
appliance is cool before removing any of the components. See the instructions on the following page for
removing the secondary air tubes.
REMOVING BAFFLE COMPONENTS
1. Lift up on the
front portion of
the front three
firebricks.
3. Slide the center front firebrick
forward and out the door opening. Then
slide the side front firebricks towards
the middle then out in the same manner.
2. Lift the front
baffle support
and rotate it
forward until it
can be removed.
4. Slide the center baffle support
forward and out of the firebox.
5. Slide the rear firebrick forward and
out of the firebox. NOTE: When the
center rear firebrick are slid forward the
baffle support will come to rest on the
rear secondary air tube and rear air
channel.
6. Slide the bypass all the way forward.
7. Reach into the firebox and push up
on the bypass rod until the bypass
damper seperates from the bypass rod.
Remove both the bypass damper and
bypass assembly by sliding them
between the front two secondary air
tubes.
REPLACEMENT INSTRUCTIONS:
A. Place the bypass support above the secondary air tubes in the rear center of the firebox.
B. Position the bypass damper so the bypass rod inserts into the two tubes on the bypass damper (make sure to have
correct orientation). Then slide the bypass damper over the bypass support until both are centerd in the firebox.
C. Follow the instructions above in reverse order, starting with step number 5.
3.
1.
2.
4.
5.
5.
Tab
Welded to
Firebox
Front
Baffle
Support
Front
Firebrick
SIDE VIEW
6.
7.
7.
7.
