Optional Equipment
3 1
© Travis Industries
4041213
1 0 0 - 0 1 1 5 0
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1
Remove the glass (see page 17). Remove the logs and coals (if installed - page 18)
2
Reach into the firebox and remove the ember shelf (see the illustration to the right).
Remove the ember
shelf. Note: when in
place, there is a gap
between the shelf and
the burner.
AA
AA
AA
AA
AA
AA
AA
AA
AAA
AAA
AAA
3
Remove the burner (see illustration below).
AA
AA
AA
A
A
AAA
AAA
AAA
AAA
AA
AA
AA
Slide the air shutter all the
way shut (to the right).
Lift slightly on the burner and slide it to the left
so the mixing tube slides off the orifice.
Make sure this pin inserts
into the hole in the bottom of
the burner when re-installing.
This baffle, which is loosely attached,
must hang down behind the right rear
log pin when re-installing.
a
b
