Large Flush Wood Hybrid-Fyre Insert:
Cypress Face Installation
(96400539)
Page 5 of 7
17601689 - Printed 4/10/12
© Travis Industries, Inc.
9. Attach the lower face to the fireplace by inserting the tabs on the bottom into the slots provided in the insert.
The face should be aligned flush with the insert. Tilt the front of the assembly up slightly as you guide it into
place.
Figure
17:
Attaching
the
lower
face
Figure
18:
Face
aligned
flush
with
the
insert
NOTE
: If the power cord is routed on the hearth, make sure it is routed through the cut-away in the bottom of the
face.
Figure
19:
Routing
the
power
cord
Figure
20:
Routing
the
power
cord
10. Attach the air control rod extension to the air control rod on the unit.
Figure
21:
Attaching
the
air
control
rod
Figure
22:
Tightening
the
air
control
rod
