Large Flush Wood Hybrid-Fyre Insert:
Cypress Face Installation
(96400539)
Page 2 of 7
17601689 - Printed 4/10/12
© Travis Industries, Inc.
Installation
1. Lay the face upside down on a non-scratching flat surface. Align the sides with the top of the face and secure
with the 4 nuts. Use a 3/8” wrench to tighten the nuts.
Figure
3:
Nut
location
Figure
4:
Tightening
a
nut
2. Secure the wires to the face using lock-ties. Make sure the wires are secured at all 3 locations. Tighten the
lock-ties and cut off excess tie. Do not over-tighten.
Figure
5:
Lock
‐
tie
Figure
6:
Securing
the
lock
‐
tie
Figure
7:
Wires
secured
with
lock
‐
tie
Figure
8:
Wires
routed
