ProBuilder 36/42 Ember-Glo Light Kit (MV / GSB2)
SKU# 94400897
Page 6 of 9
17602033 - Printed 8/28/18
© Travis Industries, Inc.
14. Disconnect the dashboard from the fireplace (4 screws hold it in place) and place it face down in front of
the fireplace.
NOTE
:
The rheostat shown in the picture above operates the blower. If a blower is not being installed on your
fireplace, the blower rheostat will not be present on the dashboard.
15.
Place the rheostat assembly onto the studs on the right side of the dashboard and secure using the 2
nuts included with the kit. Use an 11/32” nut driver to tighten the nuts.
NOTE:
The bracket on the rheostat must face upwards so the control wheel fits through the slot on the dashboard
(see pictures below).
