ProBuilder 36/42 Ember-Glo Light Kit (MV / GSB2)
SKU# 94400897
Page 2 of 9
17602033 - Printed 8/28/18
© Travis Industries, Inc.
Installation Notes
Install The Blower First
The blower is installed at the back of the fireplace. If using, we recommend installing it first so its installation does not
interfere with the light wiring.
WARNING
:
Disable power to the fireplace while installing the lights (disable the service breaker). Do not
activate power to the fireplace until the light kit is fully installed and grounded.
Do not connect 110-120 VAC to the gas control valve or wiring system of this appliance.
Installation
1. Disable power to the fireplace (turn the service breaker off).
2. Remove the screen and glass frame (see manual for details).
3. Carefully remove the logs and embers (if applicable).
4. Remove the media tray skirt.
5. Remove the media tray. Remove the two screws that secure the media tray to the front of the grate
assembly. Remove the tray and keep the screws for reinstallation (see below).
