10
9
E
clamp plate screw
M-L
M-K
bar
hook slot
M-H
M-A
M-I
-15° ~ 15°
5. Installing the Projector
Loosen clamp plate screw with a 5mm Allen key to
adjust the inner rod to the desired extended position
and then tighten clamp plate screw
.
• Guide the hook slots of the adapter bracket onto
the bars in pivot bracket and secure with two
screws and two washers
• Cut cable cover to fit the length of the outer rod
opening.
nap cable cover into opening
Important:
Make sure the projector is correctly
hooked and the screws are locked safely before
releasing the projector.
.
Then s
.
ceiling
6. Adjustment
You can slightly tighten the screw to
secure the projector at any angles,
when it has become loose during use.
Adjust to the desired angle or tilt.
Maintenance
• Check that the bracket is secure and safe to use at regular intervals(at least every three months).
• Please contact your dealer if you have any questions.
