Adjustment of adjustable handle
✔
When in use, the equipment shall
always remain suspended, cutting the
grass above the ground. For your
convenience, the height of the
adjustable handle can be adjusted in
the following way:
1. Loosen the wing nut that fixes the
adjustable handle to the bar.
2. Slide the adjustable handle upward
or downward to the desired height.
3. Tighten the wing nut.
Replacement of the nylon line
✔
The life of the nylon line depends on
the skill the operator has to avoid
contact with stones, walls, fences and
sidewalks. Frequent contact with those
obstacles cause premature wear out of
the nylon line.
✔
To substitute it, get a refill containing
the spool and the nylon line from
TRAPP technical assistance shop or
from specialized dealers.
How to remove and replace
the spool
✔
Make sure the equipment is unplugged.
✔
Turn the trimmer or lawn mower
upwards.
✔
Hold the spool base (6) with one hand
and with the other remove the spool
cover (1) turning it counterclockwise (as
shown in the spool cover).
✔
After removing the spool (3), thoroughly
clean the equipment base, taking care
not to allow grass to fall in the motor
compartment.
✔
To replace the spool, pass the tip of the
nylon line (4) through hole (2), fit the
spool on cover (1), align the spool
cover on the base guide (5), press it
downward and turn it clockwise until
you hear a “click”.
ENGLISH
25
Bar
Wing nut
Adjustable
handle
Attention!
Whenever substituting the spool (refill),
keep the spring (7) to reuse it.
6
7
2
4
5
3
1
