5
4. Set up an Internet connection
The camera will scan for available Wi-Fi networks (SSID). Tap the
name of the Wi-Fi network (SSID) that you wish to connect with
the camera, and enter the password of your Wi-Fi router if necessary.
First-time setup is now complete.
Note 1:
Once you complete Internet setup,
the LED on the camera
will glow green after 1 to 2 minutes.
2:
Wi-Fi SSID is the wireless network name.
3:
If the camera cannot find the Wi-Fi network you
wish to
connect to, please make sure the camera and
the Wi-Fi
router are within range of each other.
4:
If you type in the wrong SSID password the camera will
beep
three times and then reset to factory default
automatically. Please close the App and follow step 3.3 of
this user
manual to set up the camera again.
5:
If you have completed Internet setting but the Power/Status
LED glows orange, please check Wi-Fi router is ok in
internet connection and make sure the camera and the
Wi-Fi router are within range of each other.
6:
Make sure your mobile is connected to the Wi-Fi AP/Router
after setting up.
