Installation into JBJ 28g Nano Cube Series
The NanoZapp™ is the perfect compliment to our #1 selling 28g Nano-Cube
Aquarium, enjoy the benefits of sterilization while being discreetly hidden.
1. Remove one of the pumps.
2. Measure and cut included hose
3. Connect NanoZapp to hose
4. Plug into electrical outlet.
CAUTION: Inspect UV Lamp & Quartz Sleeve
Prior to Installation.
Upon receiving this product please untighten the quartz
sleeve cover and inspect the quartz sleeve and lamp for
any damage.
Close attention should be observed to the
UV lamp & Quartz Sleeve prior to use.
Please contact your authorized dealer if your product
is found damaged.
Initial Inspection - For breakage
Do not allow children to operate this aquarium appliance. Do
not operate if appliance has a damaged cord or plug.
Note: Do Not Plug the
pump connected to the
NanoZapp back into the
Ocean Pulse Wavemaker.
Plug into a separate outlet
as the sterilizer requires a
constant flow of water.
8
