background image

Various TRANSTHERM cabinet models

In order to adapt to different requirements and usages, there are 3 types of
TRANSTHERM wine cabinets.  These cabinets have different characteristics
and specifications.

How do I know the model of my cabinet?

The first page of this manual has a self adhesive label on
it showing the exact model, type and serial number of
your wine cabinet.

1 temperature maturing cabinets:

MAS - MANOIR - ERMITAGE - STUDIO

Designed for storing and maturing all wines, these cabinets reproduce the exact
conditions of a natural cellar (one temperature at all times), no matter what the
outside temperature (between 0 and 35°C).

3 temperature tasting cabinets:

CASTEL - COTTAGE

In addition to the central maturing area (1 temperature) these cabinets also have
2 specific compartments for bringing to room temperature (upper compartment)
and chilling (lower compartment) a few bottles. 

Multiple temperature service cabinets:

MAS - CELLIER - RÉSERVE

Also known as "Day Cellars" these cabinets are not designed for maturing but
for having all types of wine at their respective serving temperature.  In fact, they
are designed in such a way that you can have 10 different temperature areas in
levels of the same cabinet (for the larger models). 

important

English - P4

TT INTEGRABLE GAR final GB   1/10/01  13:56  Page 4

Summary of Contents for STUDIO Fitted



















Reviews: