Operating anomalies
When starting up
The compressor will not operate at the temperature required, and at less
than the ambient temperature:
1 - Ensure that there is power to the electrical supply plug by connecting another
electrical appliance to it, as well as checking that the On/Off switch is in
position 1.
2 - Press on the TEST button and check that the 2 indicator lights (green and
red) light up.
3 - Turn the closed cold adjustment button in an anticlockwise direction and
check that the indicator light lights up.
4 - If after carrying out steps 2 and 3 you still cannot get the compressor to start
up correctly, contact your retailer.
The compressor will not turn off:
Adjust the cold indicator to its farthest mark and check if the cold circuit
indicator light has gone out. If the compressor will still not turn off, unplug it
and contact your retailer.
In operation
The check thermometer shows a lower temperature than required:
1 - Check the recommendation temperature adjustment (table on Page 9).
2 - Check that the red, hot circuit indicator light is lit up.
3 - Press on the TEST button and check that the 2 indicator lights (green and
red) located to the right of the panel are lit up.
If either of steps 2 and 3 are not correct, contact your retailer.
The check thermometer shows a higher temperature than required:
1 - Check the recommendation temperature adjustment (table on Page 9).
2 - Check that the green, cold circuit indicator light is lit up.
3 - Press on the TEST button and check that the 2 indicator lights (green and
red) located to the right of the panel are lit up.
If either of steps 2 and 3 are not correct, contact your retailer.
English - P13
THE USE OF GLASS DOORS HAS AN EFFECT ON PERFORMANCE
TT INTEGRABLE GAR final GB 1/10/01 13:56 Page 13
