26
•
Visitors press the ‘Bell/Cal
l
’ butt
on on the IP Door Phone in order to dial to operator.
•
Operator opens the door by using the Door Opening code from their extension.
•
Visitor enters into the building and waits till Door 1 is closed. Sensor 1 follows and indicates to IP Door
Phone the door 1 status.
•
Door 2 will open automatically when Door 1 is closed.
•
Sensor 2 shall indicate to IP Door Phone when Door 2 is closed and the IP Door phone returns to its Standby
mode.
2)
Sensor 1 & 2 type
Specifies type of equipment connected to PINs
‘Sensor1’ and ‘Sensor2’
3)
Emergency Message
If set sensor status
as “Emergency Button” the contents (can be phone number, location and so on) of
the
emergency message will be sent to the console (Day and Night admin destination) when emergency function is
activated
3.6
Access Control
Description:
Access Control is the core feature of the ACP door phone. There are series of options for access control strategies to
adapt different requirements. User can easily setup access control with times, tokens and PINs.
Summary of Contents for IP3922 Series
Page 9: ...8 2 Installation IP3931 IP3932 IP3950 IP3960M...
Page 56: ...55...
