6VDC 4×AAA batteries
$SSUR[J([FOXGLQJWKHEDWWHULHVDQGFXII
A01
Digital LCD V.A.61mm × 74mm
Approx.100.2mm×138.2mm×51mm
4×AAA batteries,user manual,AC adapter
5V 1A
Battery powered mode:
AC adaptor powered mode:
(Please only use the recommended AC
DGDSWRUPRGHO
This section includes a list of error messages and frequently
asked questions for problems you may encounter with your blood
pressure monitor. If the products not operating as you think it
should, check here before arranging for servicing.
PROBLEM SYMPTOM
CHECK THIS
REMEDY
No power
Low batteries
Error
message
Display will not
light up.
Batteries are exhausted.
Replace with new batteries
Insert the batteries
correctly
Replace with new batteries
Batteries are inserted
incorrectly.
Display is dim or
show
Batteries are low.
E01 shows
E03 shows
E04 shows
E+ ,shows on
the display.
Matching failure or
transmission timeout.
The treatment of the
measurement failed.
AC adaptor is inserted
incorrectly.
Insert the AC adaptor
tightly
E02 shows
The cuff is too tight
or too loose.
Refasten the cuff and then
measure again.
The monitor detected motion
or talking during measuring.
Movement can affect the
measurement.Relax for a
moment and then measure again
Relax for a moment and
then measure again.
The measurement process
does not detect the pulse
signal.
Loosen the clothing on
the arm and then
measure again.
Warning
message
Relax for a moment.
Refasten the cuff and then
measure again. If the
problem persists, contact
your physician.
“out ” shows
Out of measurement
range
TROUBLESHOOTING
SPECIFICATIONS
Reconnect to the bluetooth
and re-upload data
H bAt shows
Adaptor voltage is
higher than 7.5V
Replace with new adaptor
EEx,shows on
the display.
Hardware error
Retake the measurement.If the
problem persists, contact the
retailer or our customer service
department for further assistance.
Refer to the warranty for contact
information and return instructions.
Type BF applied part
WARNING: No modification of this equipment is allowed.
Power supply
Display mode
Measurement mode
Oscillographic testing mode
Measurement range
Measurement perimeter
of the upper arm
Weight
External dimensions
Attachment
Mode of operation
Continuous operation
Degree of protection
Protection against
ingress of water
Accuracy
Normal working condition
Storage & transportation
condition
Software Version
Pressure:
5
℃
-40
℃
ZLWKLQPP+JN3D
Pulse value:±5%
Rated cuff pressure:
PP+JaPP+JN3DaN3D
Measurement pressure:
6<6PP+JaPP+JN3DaN3D
',$PP+JaPP+JN3DaN3D
3XOVHYDOXHEHDWPLQXWH
IP21 It means the device could protected against
solid foreign objects of 12.5mm and greater, and
protect against vertically falling water drops.
Device Classification
Battery Powered Mode:
Internally Powered ME Equipment
AC Adaptor Powered Mode: Class II ME Equipment
A temperature range of :+5°C to +40°C
A relative humidity range of 15% to 90%,
non-condensing, but not requiring a water vapour
partial pressure greater than 50 hPa
An atmospheric pressure range of :
700 hPa to 1060 hPa
Temperature:-20°C to +60°C
$UHODWLYHKXPLGLW\UDQJHRIQRQFRQGHQVLQJ
at a water vapour pressure up to 50hPa
About 22 cm ~ 32 cm, 22cm ~ 42cm, 22cm ~ 45cm
