background image

8

 

* If you have any problems with this device, such as setting up, maintaining or using, please contact the 

SERVICE PERSONNEL of Transtek. Don’t open or repair the device by yourself in the event of 

malfunctions. The device must only be serviced, repaired and opened by individuals at authorized 

sales/service centers.

* Please report to Transtek if any unexpected operation or events occur.

* Keep the unit out of reach of infants, young children or pets to avoid inhalation or swallowing of small 

parts. It is dangerous or even fatal.

* Be careful to strangulation due to cables and hoses, particularly due to excessive length.

* At least 30 min required for ME equipment to warm from the minimum storage temperature between uses 

until it is ready for intended use. At least 30 min required for ME equipment to cool from the maximum 

storage temperature between uses until it is ready for intended use.

* This equipment needs to be installed and put into service in accordance with the information provided in 

the ACCOMPANYING DOCUMENTS;

* Wireless communications equipment such as wireless home network devices, mobile phones, cordless 

telephones and their base stations, walkie-talkies can affect this equipment and should be kept at least a 

distance d away from the equipment. The distance d is calculated by the MANUFACTURER from the 80 

MHz to 5.8 GHz column of Table 4 and Table 9 of IEC 60601-1-2:2014, as appropriate.

* Please use ACCESSORIES and detachable parts specified/ authorised by MANUFACTURER. Otherwise, 

it may cause damage to the unit or danger to the user/patients.

* There is no luer lock connectors are used in the construction of tubing. If there has,there is a possibility 

that they might be inadvertently connected to intravascular fluid systems, allowing air to be pumped into a 

blood vessel.

* Please use the device under the environment which is provided in the user manual. Otherwise, the 

performance and lifetime of the device will be impacted and reduced.

* The equipment is not AP/APG equipment and not suitable for use in the presence of a flammable 

anesthetic mixture with air of with oxygen or nitrous oxide.

 

INTRODUCTION

INTRODUCTION

9

SYMBOL DESCRIPTION

EXPLANATION

LCD Display Symbol

CAUTION

Diastolic  blood pressure

Low blood pressure

Low battery

Batteries are runnning low and need to be replaced

Pulse in beats per minute

Pulse display

Motion indicator

Motion may result in an inaccurate measurement. 

  Systolic blood pressure

High blood pressure

Summary of Contents for Medel Soft TMB-1581-S























Reviews: