TRANSTEK GBF-1251-B1, User Manual

Page: 6 / 14

9 8
Initial Start-Up Initial Start-Up
The body fat analyzer GBF-1251-B1 supports multiple users (Up to Eight). You may
follow below instructions to assign User ID and set up your own profile, including Gender,
Stature, and Age.
With batteries correctly installed, touch “SET” key to turn on the
device,then touch “SET” key again for about 3s to enter setting.
The system will request User ID selection first. As pictured on the
right, “1” blinks. The operator may touch the function key or
to select User ID among U1 to U8.
Touch “SET” key to confirm User ID.
1.Assigning User ID
2.Setting Data deletion
Set Up Your Profile
After confirming User ID, the system will divert to Data deletion
setting.
As pictured on the right, the letter “n” blinks. The operator may
touch the function key or to select “ ” or “ ”.
Touch “SET” key to confirm Data deletion.
Note: Select the “ ” means the settings of all the users won’t be
deleted;select the “ ” means the settings of all the users will be
deleted.
5.Setting Age
After confirming Stature, the system will divert to Age setting.
As pictured on the right, the digits “30” blinks. The operator may
touch the function key or to increase or decrease the
numeral. (Range: 10 to 85 years old)
You may touch and hold the function key or for fast changing
the numeral.
Touch “SET” key to confirm Age.
When the LCD displays “ ” and “ ” alternately, you may start
measuring.
3.Setting Gender
After confirming Data deletion, the system will divert to Gender
setting.
As pictured on the right, the portrait blinks. The operator may
touch the function key or to select Gender.
Touch “SET” key to confirm Gender.
With batteries correctly installed, press “UNIT” key in the back of the scale to select
measurement unit. The default measurement unit is “lb”. You may press “UNIT” key to
choose between pound and kilogram.
Select Measurement Unit
Note: If there is no operation in the weighing mode, the scale will turn off after about
20 seconds.
4.Setting Stature
After confirming Gender, the system will divert to Stature setting.
As pictured on the right, the digits “ 5’5.0” ” blinks. The operator
may touch the function key or to increase or decrease the
numeral. (Range: 3’3.5” ft to 7’2.5” ft /100 cm to 220 cm)
You may touch and hold the function key or for fast changing
the numeral.
Touch “SET” key to confirm Stature.