Product HandBook
AquaTrans
™
& AquaMove
™
1800 816 277
www.tti.com.au
9
AquaTrans & AquaMove Operation
The AquaTrans & AquaMove is supplied with an MBSP fitting at the base of the tank to connect to your
discharge system. When so connected, the control of flow may be regulated by the discharge system.
For the larger tanks (2,000 litres and above) fitted with a 2” MBSP fitting, the tank’s filling lid must be
loosened and opened to provide adequate venting when discharging the tank’s fluid.
Maintenance
Your AquaTrans & AquaMove requires minimal maintenance but regular cleaning and checks will ensure
safe and reliable service over its lifetime. Periodic checks and inspections will identify any potential issues,
enabling timely rectification and minimising downtime.
Periodic Checks
The following checks and cleaning operations should be undertaken on a regular basis. The frequency of
these activities will depend on the nature of the operating environment and the operational hours of the
AquaTrans & AquaMove unit. Refer to the maintenance schedule tables below for details of maintenance
intervals.
•
Clean the unit and inspect it for any signs of damage or wear. Replace any safety labels if they are
damaged or illegible.
•
Check all hoses, fasteners and fittings are firmly secured, tighten if necessary.
•
If the AquaTrans & AquaMove is to be stored for an extended period, ensure the tank and all pipelines
are empty and are not pressurised. Store the unit in a clean, dry and well-ventilated area.
