![TransTank AquaMove Operator'S Handbook Manual Download Page 7](http://html1.mh-extra.com/html/transtank/aquamove/aquamove_operators-handbook-manual_1152625007.webp)
Product HandBook
AquaTrans
™
& AquaMove
™
1800 816 277
www.tti.com.au
7
Machine Limitations
The AquaTrans & AquaMove tanks are subject to operating limitations. It is the operators’ responsibility to
ensure that this equipment is being operated safely and within these limitations.
Driving Stability
The AquaTrans & AquaMove tanks are heavy when filled with fluid. To maintain stability while operating this
unit:
•
Ensure the vehicle tyres are inflated to their correct pressure at all times. Underinflated tyres can
cause excessive lateral motion of the tyre, which may cause a rollover.
•
Allow extra room for braking and turning when the tank is full.
•
Ensure any side gradient (slope) is accounted for, especially when the AquaTrans & AquaMove tank
is full, as the unit will have a higher centre of gravity.
Operating Instructions
Before First Use
Your AquaTrans & AquaMove tank is delivered fully assembled. Before use, it needs to be set up using the
following instructions:
•
Complete the warranty registration online at www.tti.com.au/warranty-registration, or use the
Warranty Registration Card at the back of this handbook.
•
Store this handbook, along with the Tank Quality Check Form and pump unit’s manual in the provided
leather pouch, in a safe and easily accessible place for future reference.
WARNING: The operator must fully understand all aspects of this handbook. Do not
use the AquaTrans & AquaMove tank until you have read this handbook.
•
Read and thoroughly understand this handbook, paying particular attention to all safety requirements,
before using the AquaTrans & AquaMove for the first time.
•
Check that all fittings are secure following transit and are not damaged in any way.
•
Inspect the tank for any damage or abrasions.
•
Mount the AquaTrans & AquaMove tank onto the vehicle, ensuring it is fully supported on a flat surface.
Ensure all feet are secured correctly with the supplied mounting pins (500 to 7,000 litres) or the
supplied mounting pins and wedges for the tanks of 8,000 litres and above, refer to Figure 2.
•
For AquaTrans & AquaMove tanks of 2,000 litres and above, TTi recommend installing the LiquidLocker
baffle system to minimise fluid surge during transportation. It is essential the LiquidLocker system be
used in tanks of 10,000 litres and above.
•
If the AquaTrans & AquaMove is supplied with an optional steel frame, ensure the steel frame is
securely mounted to the vehicle.