Transpak MINI-VERTI TP-202MV, Operation, Safety & Spare Parts Manual

Page: 27 / 72

- 25 -
(2) Disconnect the Sword Unit from machine if it would not be used for a long
time.
Press the release button
○
6
located on the right side of the sword to disassemble the sword
from the machine. Place the sword to the prearranged place.
(3) How to Charge the Battery
1. Plug the power wire of UPS to socket.
2. The LCD (P14) of UPS would show current battery state.
3. After 30 seconds, UPS would sound Bz Bz continuously for around 10 seconds.
4. It takes around 12 hours for charging.
Note the following points while charging:
i. Avoid water and direct sun light.
ii. Make sure it's situated somewhere ventilating.
iii. Stay away from fire.
iv. Avoid high-temperature environment. The temperature of the battery shouldn't
be higher than 5
0℃
.
v. Charging at flat surface. Avoid positing it on slope.
vi. Avoid shock and dust.
vii. Prevent short between positive pole and negative pole of the battery.