- 13 -
b. TP-202MVB
(1) Power Switch
Supply the power when switch is ON.
(2) Feeding Length Knob
Strap is automatically fed according with the time preset
by the knob.
(3) Reset Button
To pull strap back into machine and/or to cut off strap.
(4) Strap Feed Button
To feed strap out of machine manually.
(5) Power Plug
To be connected to a 110V or 220V/230V/240V source.
(6) Strap Reel
Slide on strap coil here. (If the reel core is 280mm, you
can take off the center drum to have core size 200mm.)
(7) Brake
Stops the over-rotation of the strap reel.
(8) Strap Guide for Brake
Place strap on the Brake (7).
(9) Strap Bypass Guide
The strap is passed through this guide.
(10) Strap Feed Button
To feed strap out of machine manually.
(11) Sword Unit
To guide strap running through pallet.
(12) Battery Unit
Supply the power through battery.
(13) Weld cooling timer
To ensure good sealing efficiency under higher tension.
Summary of Contents for MINI-VERTI TP-202MV
