Transonic TC-31531LED, Instruction Manual

Page: 9 / 32

4. Remote Control Setup
1. Open the rear battery cover on your remote control.
2. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure
correct polarity marks "+" and "-" on the batteries match the diagram as shown within
the battery compartment.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to
the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc)
Remove batteries when the remote is not used for a long time.
3. Recommended use of ALKALINE type batteries.
5. Remote Control Operation
1. Power button
To turn LED TV on or Standby mode.
2. S.Mode button
Press to select the audio mode,using ◄► navigation buttons to select the options.
3. P.Mode button
Press to select the picture mode
4. -/-- button
Press this button to enter a program number with different digits.eg. - for 1,-- for 11,--- for 111.
5. SLEEP button
This feature allows you to set up sleeptime for your TV. Press the button repeatedly to
select the desired time to sleep or select OFF Time to turn off the TV to Standby mode.
6. Number buttons (0-9)
Press to select the numbers.
7. SOURCE button
Press to enter the source menu, press up/down navigation button to select the source
and press ENTER button to confirm
8. CH-/CH+ buttons
In ATV or DTV mode, press to select the analog TV channel or digital TV channel
9. ◄►▲▼Navigation buttons
Press the navigation button to select the OSD menu option or settings
10. Vol-/Vol+ buttons
Press to increase or decrease the volume
,using ◄► navigation buttons to select the options.
7