EIS-LCD, EIS-40
USER MANUAL
Page 27
User can select two different modes how the outputs are managed:
1.
Slave mode: the behavior of the outputs (Time pulse or Latching mode) is defined in the
Output
tab.
2.
Master mode: when the output is driven by the timer (output is activated by the timer) the
outputs are in latching mode regardless of the setting in
Output
tab. When the output is not
activated by the timer, the outputs are working by the defined settings in
Output
tab.
The described settings are the same for both timers.
Timer settings:
•
Timer:
Parameter is used to enable and disable the timer function.
•
Mode:
User can select between day or week mode. In day mode the timer will control on
the day table, which is the same for all week. In week mode the user can define different
setting for each day in the week.
•
Timer controls:
Output controlled by the timer function.
•
Output mode:
Output mode management definition.
