Translux Fair-Play MP-50 Series, Quick Reference

Page: 7 / 20

Q
UICK
R
EFERENCE
B
ASEBALL
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29-1 • REV 1907.10 7
B
ASEBALL
S
YSTEM
S
ETTINGS
Shown are the most common system settings for high chool (NFHS) and (NCAA) baseball.
SYSTEM SETTINGS
SCBD TYPE #? __
4 DIGIT CLK? Y/N
CONN.1,MP69? Y/N
CONN.2,MP69? Y/N
CONN3&4,MP69?Y/N
RADIO@ TIMER?Y/N
CLK.AT TIMER?Y/N
TEAM NAMES? Y/N
QUIT? Y/N
Brd 00 Group 900
MP-70, VER.3.04i
BA B0 S0 O0 v
- BASEBALL -
Refer to the board type label near the driver circuit board inside the scoreboard or
MP-70/50 Series Scoreboard Controller User Guide (98-0002-29).
32 ENTER – the 2 digit board type number for model BA-7109-2.
31 ENTER – the 2 digit board type number for model BA-7200-2.
NO – this option is only for incandescent-light scoreboards manufactured before 1999.
NO – this option is only for incandescent-light scoreboards manufactured before 1999.
NO – this option is only for incandescent-light scoreboards manufactured before 1999.
NO – if not using a wireless shot/field timer.
YES – if using a wireless shot/field timer.
NO – most scoreboards are not equipped with electronic team name displays.
YES – if scoreboard is equipped with electronic team name displays.
YES – to exit System Settings.
NO – to start over at the SCBD TYPE#?.
NO
AT-BAT ON SB?Y/N
NEW H&E DIG? Y/N
PITCH SPEED? Y/N
2 DIGIT CLK? Y/N
24HR TOD CLK?Y/N
4 DIGIT CLK? Y/N
NO – if you do not have a MP-7200 scoreboard.
YES – only IF you have a MP-7200 scoreboard.
For board type 31 only:
NO – the control will default to showing the two-digit clock instead of AT-BAT.
YES – to display AT-BAT on the scoreboard.
NO – sends 8 segment data to the Hit and Error displays.
YES – sends 12 segment data to the Hit and Error displays.
NO – does not enable Pitch Speed.
YES – enable Pitch Speed.
NO – do not enable 2 Digit Clock.
YES – enable 2 Digit Clock.
NO – if you do not have a MP-7200 scoreboard.
YES – only if you have a MP-7200 scoreboard.
NO – if you are NOT using shot timers that have a built-in game clock.
YES – if you are using shot timers that have a built-in game clock.
NO – to use a 12-hour clock.
YES – to use a 24-hour clock.
The current sport configuration is displayed. To configure for baseball, refer to BASEBALL
CONFIGURATION for additional instructions.
A0261-BA1
1. Turn off the MP-70/50.
2. Press and hold 0 key while turning on the MP-70/50, wait (2 seconds) until
“ SCBD TYPE #? ” appears before releasing the 0 key.
If CONTROL LOCKED appears, then you must first UNLOCK the control. Refer to
LOCK/UNLOCK instructions.