P a g e
|
12
2.6
WIRE’S CONNECTION
The power switch is located at the left of the front panel, and the power socket and grounding
pole is located at the right end of the rear panel, whose order goes like this, power socket and
grounding pole, and users can refer 1.4 for details.
Connecting Power Cord
User can insert one end into power supply socket, while insert the other end to AC power.
Connecting Grounding Wire
When the device solely connects to protective ground, it should adopt independent way, say,
share the same ground with other devices. When the device adopts united way, the grounding
resistance should be smaller than 1Ω.
Caution:
Before connecting power cord to TL-A1000 Live Streaming Transcoder, user should set
the power switch to “OFF”.
2.7
SIGNAL CABLE CONNECTION
Before operating, user should connect all devices requiring cables.
CHAPTER 3
DEVICE ACCESS AND LOGIN
The default login address for the live streaming transcoder is
, where ip is
changed into the real IP address of the device.
