P a g e
|
14
The option
with “►” is the current selection, users can press the ENTER key to enter the
specified submenu to modify the parameters.
3.2.1
Status
Under this menu, users can check input source status of each channel. The contents are the
same for Channel 1-8, so here just takes one channel as the example.
➢
Channel 1/2/3/4/5/6/7/8
3.2.2
TS Config
This device is equipped with maximum 8 modulator carriers. Under this menu, users can enter
the corresponding channels to set the relevant parameters. The setting principle is the same for
Channel 1-8, so here this manual just takes one channel as the example to explain. After
pressing the enter key, the LCD will display the following pages:
►2.1 Channel 1
2.2 Channel 2
2.7 Channel 7
2.8 Channel 8
►1.1 Channel 1
1.2 Channel 2
1.7 Channel 7
1.8 Channel 8
►Video Format
Encoding Status
Display input video resolution
Display encoding status: Error/Normal
Summary of Contents for TL-9524C
