P a g e
|
11
➢
Users should make sure the 2 ends of grounding wire well electric conducted and be antirust.
➢
It is prohibited to use any other device as part of grounding electric circuit
➢
The area of the conduction between grounding wire and device’s frame should be no less
than 25mm
2
.
CHAPTER 3
OPERATION
TL-9524C encoder modulator
’s front panel is user operating interface. Before operating, user
can decide whether directly use the default setting or customize the input and output
parameters setting. The detail operations go as follows:
Keyboard Function
Description
ENTER
: Activating the parameters which need modifications, or confirming the change after
modification.
MENU:
To cancel presently entered value, resume previous setting and return to previous
menu.
LEFT/RIGHT:
To move the “►” to choose or set the parameters.
UP/DOWN:
To modify activated parameter or page up/down when parameter is inactivated.
LOCK:
To Lock the screen / cancel the lock state. After pressing lock key, the system will
question the users to save present setting or not. If not, the LCD will display the current
configuration state.
At the “Factory Configuration” page, user can press “ENTER” key to restore the factory default
configuration.
Summary of Contents for TL-9524C
