User’s Guide
S4TEF10xx-11x
Stand-Alone Media Converter
•
Twisted-Pair Copper to Fiber
• 10/100Base-TX to 100Base-FX
• RS-232 to Fiber
• (4) T1/E1 to Fiber
The S4TEF10xx-11x media converter is
designed to extend signals from a 10Base-T
Ethernet/100Base-TX Fast Ethernet port, an
RS-232 data port, and up to four (4) T1/E1
network ports over fiber. The Ethernet, RS-232, and T1/E1 interfaces are independent of
each other and the signals from these ports can be sent over the fiber interface
simultaneously.
The S4TEF10xx-11x is designed to be installed in pairs. For example, install one
S4TEF1011-110 as the local media converter and another S4TEF1011-110 as the remote
media converter. All S4TEF10xx-11x models have the following copper connectors.
*Typical maximum cable distance. Actual
distance is dependent upon the physical
characteristics of the network.
The chassis version of the media converter is
C4TEF10xx-11x. For more information, see
the user’s guide on-line at:
www.transition.com.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . .10
Cable Specifications . . . . . . . . . .19
Technical Specifications . . . . . . .23
Troubleshooting . . . . . . . . . . . . .24
Contact Us . . . . . . . . . . . . . . . . .26
Compliance Information . . . . . . .27
Part Number
Duplex Fiber-Optic - 100Base-FX
S4TEF1011-110
ST, 1300 nm multimode, 2 km
(1.2 miles)*
S4TEF1013-110
SC, 1300 nm multimode, 2 km
(1.2 miles)*
S4TEF1014-110
SC, 1310 nm single mode, 20 km
(12.4 miles)*
S4TEF1015-110
SC, 1310 nm single mode, 40 km
(24.8 miles)*
S4TEF1016-110
SC, 1310 nm single mode, 60 km
(37.2 miles)*
S4TEF1017-110
SC, 1550 nm single mode, 80 km
(49.7 miles)*
S4TEF1018-110
MT-RJ, 1300 nm multimode, 2 km
(1.2 miles)*
Connector Type
Number
Description
Ethernet
1
RJ-45, 100 Mb/s, 100 m
(328 ft.)*
RS-232
1
6-pin, DIN serial
3.2 m
(10 ft.)*
T1
4
RJ-48
S4TEF1029-11x
(Single mode, single fiber models are listed on page 2.)
The various fiber connectors are available on separate models. Both duplex and single
mode fiber optic converters are available:
