Transition Networks SPS-2460 Series, User Manual

Page: 7 / 9

Transition Networks SPS-2460-xx Power Supply User Guide
33455 Rev. B https://www.transition.com/ Page 7 of 9
Specifications
Output Voltage : 12.25 VDC Current: 1.0A
Load Regulation : ±5% at 10% load to full rated load
Noise and Ripple : ±40 mV peak-to-peak of output voltage
Output Voltage : 12.25 VDC at 1.0 A maximum
Input Voltage : 24 – 60 VDC; 24 – 42VAC RMS
Efficiency : 80 % (typical)
Isolation Voltage (Dielectric withstand) Meets IEC 950 for one minute 1500 VAC: Output/Input 1500 VAC:
Input/Safety GND 1500 VAC: Output/CASE
Over Load Protection (OLP) : When the average power rating exceeds 125%-150% of maximum power, output
voltages reduced to a safe dissipation level; protects against short circuit of any output.
No Load Protection : No damage to power supply when operating at no load
Transient Protection : No voltage spike at power-on, power-off, or power failure
Dimensions :
SPS-2460-SA : Width: 3.75” [95 mm] Depth: 3.1” [79 mm] Height: 1" [25 mm]
SPS-2460-PS : Width: 4.5” [114 mm] Depth: 3.4” [86 mm] Height: 1" [25 mm]
Power Consumption : 3 Watts (max) @ 24 VDC input, 12.25 VDC output
Operating Tem p: -20° to +65°C (-4 to +149°F)
Storage Temp : -40 to +85°C (-40 to +185°F)
Humidity : 5% to 95% (non-condensing)
Altitude : 0 – 10,000 ft.
Weight : 1 lb. [0.45 kg]
MTBF : greater than 250,000 MIL-HDBK-217F hours at 25ºC (77ºF)
greater than 687,500 Bellcore hours at 25ºC (77ºF)
Compliance : CISPR/EN55022, Class A, FCC Class A
Warranty : Lifetime
For More Information
Other related manuals are listed below.
• Product Documentation Postcard, 33504 (shipped with each media converter)
•
M/GE-PSW-xX-0x User Guide (33398)
•
WMBS, WMBL, WMBP, & WMBM Wall-Mount Brackets Install Guide (33393)
•
Release Notes (firmware version specific)
For Transition Networks Drivers, Firmware, etc. go to the Product Support webpage at
https://www.transition.com/support/product-support/ (logon required).
For Transition Networks Application Notes, Brochures, Data Sheets, Manuals, etc. go to
https://www.transition.com/support/library/ (no logon required).