Transition Networks
SPOEB10xx-105 User Guide
33618 Rev. C
https://www.transition.com/
Page
7
of
16
CAUTION
: Associated Ethernet wiring must be limited to inside the building.
Installing Fiber Cables
1. Locate a 100Base-FX fiber cable with male, two-stranded TX to RX connectors installed at both ends.
2. Connect the fiber cables to the SPOEB10xx-105 media converter as described:
•
Connect the male TX cable connector to the female TX port.
•
Connect the male RX cable connector to the female RX port.
3. Connect the fiber cables to the other device (another media converter, hub, etc.) as follows:
•
Connect the male TX cable connector to the female RX port.
•
Connect the male RX cable connector to the female TX port.
Installing the Copper Cable
1. Locate 100Base-TX copper cables with male, RJ-45 connectors installed at both ends.
2. Connect the RJ-45 connector at one end of the cable to the RJ-45 port on the media converter.
3. Connect the RJ-45 connector at the other end of the cable to the RJ-45 port on the other device (wireless
access point, VoIP phone, network camera, etc.).
