Transition Networks SM24-100SFP-AH, Installation Manual

Page: 21 / 60

Features and Benefits
1-5
1
Power Supply Sockets
There is one standard power socket on the rear panel of each switch for the AC
power cord.
Figure 1-4. Power Supply Sockets
Note: There is no BPS currently supported by this switch. The RPS100W will be
supported in a future release.
Features and Benefits
Connectivity
• 24 100BASE-BX / 100BASE-FX SFP transceiver slots
• Auto-negotiation enables each RJ-45 port to automatically select the optimum
speed (10, 100, or 1000 Mbps), and the communication mode (half or full duplex)
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3, 4 or 5 for
10 Mbps connections, Category 5 for 100 Mbps connections, and Category 5 or
better for 1000 Mbps connections
• IEEE 802.3-2005 Ethernet, Fast Ethernet, Gigabit Ethernet compliance ensures
compatibility with standards-based hubs, network cards and switches from any
vendor
Expandability
• Two Gigabit Small Form Factor Pluggable (SFP) transceiver slots (shared with
1000BASE-T ports)
• Supports 1000BASE-SX and 1000BASE-LX, 1000BASE-LH and other
SFP-compatible transceivers
Performance
• Transparent bridging
• Switching table with a total of 8K MAC address entries
• Provides store-and-forward switching
• Supports wire-speed filtering and forwarding
• Broadcast storm control
B PS
DC IN
1 0 0 /1 1 5/ 22 0 /2 3 0 V
1 .0 /1 .0 /0 .5 /0 .5 A
5 0 /6 0 HZ
1 2 V 4 5A 4 5 A
. ( )
,
Power Socket
Backup Power Supply