Transition Networks SISTF101X-241-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
21
Troubleshooting
Verify that you are using the right power cord/adapter. Please don’t use the power
adapter output higher than the power input of this switch or it may damage the switch.
Select the proper UTP/STP cable to construct your network. Please check that you are
using the right cable. Use unshielded twisted-pair (UTP) or shield twisted-pair (STP)
cable for RJ-45 connections: 100 Category 3, 4, or 5 cable for 10Mbps connections or
100 Category 5 cable for 100Mbps connections. Also be sure that the length of any
twisted-pair connection does not exceed 100 meters (328 feet).
Diagnosing LED Indicators:
To assist in identifying problems, the switch can be easily
monitored through panel indicators, which describe common problems the user may
encounter and where the user can find possible solutions.
IF the power indicator does not light on when the power cord is plugged in, you may have
a problem with power cord. Then check for loose power connections, power losses or
surges at power outlet. IF you still cannot resolve the problem, contact your local dealer
for assistance.
If the LED indicators are normal with the correctly connected cables and the packets still
cannot transmit, please check your system’s Ethernet devices’ configuration or status.
