Transition Networks SISTF1011-140-LR User Manual Download Page 10

18

SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T)

24-hour Technical Support: 

1-800-260-1312

-- International: 

00-1-952-941-7600

Troubleshooting 

-- Continued

5.

Is a 100M LED (near the fiber links) flashing?
NO

If there is activity on the corresponding fiber port, disconnect and
reconnect the fiber cable to restart the initialization process.

If there is no activity on the corresponding fiber port, contact Tech
Support: 800-260-1312, Int’l: 00-1-952-941-7600.

YES

Proceed to step 6.

6.

Are any of the 10M LEDs (on the RJ-45 port) illuminated? 
YES

The device has selected 10 Mb/s for the twisted-pair link.

If the speed is not correct, disconnect and reconnect the twisted-pair
cable to restart the initialization process.  

Proceed to step 7.

NO

Proceed to step 7.

7.

Are any of the 100M LEDs (on the RJ-45 port) illuminated? 
YES

The device has selected 100 Mb/s for the twisted-pair link.

If the speed is not correct, disconnect and reconnect the twisted-pair
cable to restart the initialization process.  

Contact Tech Support: 800-260-1312, Int’l: 00-1-952-941-7600.

NO

Check the twisted-pair cables for proper connection.

Contact Tech Support: 800-260-1312, Int’l: 00-1-952-941-7600.

[email protected]

-- Click the 

“Transition Now”

link for a live Web chat.

19

Declaration of Conformity

Name of Mfg:

Transition Networks 

6475 City West Parkway, Minneapolis MN 55344, USA

Model:

Ethernet Switch Series Redundant Ring Industrial  Switches

Part Number(s):

SISTF1011-140-LR, SISTF1012-140-LR, SISTF1013-140-LR, 
SISTF1014-140-LR, SISTF1011-140-LRT, SISTF1012-140-LRT,
SISTF1013-140-LRT, SISTF1014-140-LRT
SISTF1011-160-LR, SISTF1012-160-LR, SISTF1013-160-LR, 
SISTF1014-160-LR, SISTF1011-160-LRT, SISTF1012-160-LRT,
SISTF1013-160-LRT, SISTF1014-160-LRT
SISTF1011-170-LR, SISTF1012-170-LR, SISTF1013-170-LR, 
SISTF1014-170-LR, SISTF1011-170-LRT, SISTF1012-170-LRT,
SISTF1013-170-LRT, SISTF1014-170-LRT

Regulation:

EMC Directive 89/336/EEC

Purpose:  To declare that the

Ethernet Switch

to which this declaration refers is in

conformity with the following standards.
EN 55022:1998 Class A; FCC Part 15 Subpart B; 21CFR subpart J; 
UL 60950; UL 508; CSA C22.2 no 60950; EN 60950;
UL/cUL Class 1, Div 2, Groups A, B, C, D; ATEX Class 1, Zone 2, EExnC IIC;
EN61000-4-2, -4-3, -4-4, -4-5, -4-6; IEC 60068-2-6, -2-27, -2-32

I, the undersigned, hereby declare that the equipment specified above conforms to the above

Directive(s) and Standard(s).

 December 3, 2004_____

Stephen Anderson, Vice-President of Engineering

Date

Contact Us

Technical Support

Technical support is available 24 hours a day
US and Canada:

1-800-260-1312

International:

00-1-952-941-7600

Transition Now

Chat live via the Web with Transition Networks Technical Support.
Log onto 

www.transition.com

and click the 

Transition Now

link.

Web-Based Seminars

Transition Networks provides seminars via live web-based training.
Log onto 

www.transition.com

and click the 

Learning Center

link.

E-Mail

Ask a question anytime by sending an e-mail to our technical support staff.

[email protected]

Address

Transition Networks, 6475 City West Parkway, Minneapolis, MN  55344, USA
telephone:  952-941-7600, toll free:  800-526-9267, fax:  952-941-2322

NOTE:

The following part numbers are UL listed:  SISTF1013-140-LR, SISTF1013-140-

LRT, SISTF1014-140-LR, SISTF1014-140-LRT, SISTF1013-160-LR, SISTF1013-160-LRT,
SISTF1014-160-LR, SISTF1014-160-LRT, SISTF1013-170-LR, SISTF1013-170-LRT,
SISTF1014-170-LR, SISTF1014-170-LRT,

Summary of Contents for SISTF1011-140-LR












Reviews: