Transition Networks SGFEB1040-140 User Manual Download Page 8

14

SGFEBxx40-1xx

24-Hour Technical Support:  1-800-260-1312 -- International:  00-1-952-941-7600

Declaration of Conformity

Name of Mfg:

Transition Networks 
10900 Red Circle Drive, Minnetonka MN 55343 U.S.A.

Model:

SGFEB1x40-14x Series Media Converters

Part Number(s):

SGFEB1040-140, SGFEB4040-180

Regulation:

EMC Directive 89/336/EEC

Purpose: To declare that the SGFEBxx40-1xx to which this declaration refers is in conformity

with the following standards.

CISPR 22: 1993; EN 55022:1994 A1:1995 A2:1997 Class A; EN 55024:1998; FCC Part 15 Subpart B;

21 CFR subpart J

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and

Standard(s).

March, 2008

Stephen Anderson, Vice-President of Engineering

Date

Declaration of Conformity

SGFEBxx40-1xx

[email protected] -- Click the “Transition Now” link for a live Web chat.

15

In accordance with European Union Directive 2002/96/EC of the European Parliament
and of the Council of 27 January 2003, Transition Networks will accept post usage
returns of this product for proper disposal. The contact information for this activity can
be found in the 'Contact Us' portion of this document.

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE
PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in
damage to the public telephone network.
Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den

EG-Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der
Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über
Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer
Konformität. 

Compliance Information

CISPR/EN55022 Class A + EN55024, EN61000, FCC Class A 
CE Mark

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at the user's own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out
on the radio interference regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la lass A prescrites dans le Règlement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.

European Regulations
Warning

This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.

Achtung !

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses
Gerätes Rundfunkstörungen auftreten. In diesem Fäll ist der Benutzer für Gegenmaßnahmen
verantwortlich.

Attention !

Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des
interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures spécifiques
appropriées.

Summary of Contents for SGFEB1040-140










Reviews: