Transition Networks SBFTF10xx-1xx User Manual Download Page 18

Transition Networks 

 

 

 

 

 

 

SBFTF10xx-10x User Guide 

33404 Rev. G 

https://www.transition.com 

Page 18 of 18 

Canadian regulations 

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio 

interference regulations of the Canadian Department of Communications. 
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux 

appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le 

ministère des Communications du Canada. 

European regulations 

Warning 
This is a Class A product. In a domestic environment this product may cause radio interference in which case the 

user may be required to take adequate measures. 
Achtung ! 
Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes 

Rundfunkstörungen auftreten. In diesem Fäll is der Benutzer für Gegenmaßnahmen verantwortlich. 

Attention ! 
Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer des interférences 

radioélectriques, il appartiendra alors à l'utilsateur de prende les measures spécifiques appropriées. 

 
In accordance with European Union Directive 2002/96/EC of the European Parliament and of the 
Council of 27 January 2003, Transition Networks will accept post usage returns of this product for 

proper disposal. The contact information for this activity can be found in the 'Contact Us' portion of 

this document. 

 

CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to 

observe this caution could result in damage to the public telephone network. 
Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EGMitgliedstaaten verstösst 

gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der 

Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen einschliesslich der 

gegenseitigen Anerkennung ihrer Konformität. 

Record of Revisions 

 

Rev 

Date 

Notes 

6/5/08 

Initial release. 

12/5/08 

Switch positions 2 and 3 swapped: Speed and Duplex. Added part # SBFTF1040-105 

4/16/09 

Switch position FEF and LPT SW5 and SW6 reversed.  

9/30/09 

Added part number SBFTF1029-109. Removed VCCI statement from compliance section. 

10/14/10  Corrected the link budgets on SBFTF1015, 16, 17-105. 

8/17/11 

Revised Declaration of Conformity. 

10/14/16  Revised for FW Rev. B. Changed format and specifications. 

 

 

Trademark notice: All trademarks and registered trademarks are the property of their respective owners. 

 

Copyright restrictions: © 2008-2016 Transition Networks. All rights reserved. No part of this work may be reproduced or used 

in any form or by any means - graphic, electronic or mechanical - without written permission from Transition Networks. 

 

 

Summary of Contents for SBFTF10xx-1xx



















Reviews: