18
SAPTF33xx-1xx
24-hour Technical Suppor
t: 1-800-260-1312 -- International: 00-1-952-941-7600
FXS/FXO Specification
Unit A
(telephone emulation)
Connector:
RJ-11C
Impedance:
600 Ω
ACTA-IC:
ACTA - 0.3B, I.C.- 0.2B
Loop Current:
20 to 60 mA
Insertion Loss:
0.0 ± 1.0 dB at 1000 Hz
(When both ports are terminated at 600 Ω)
Facility Interface Code:
02LS2
Service Code:
9.0Y
Network Interface Code:
LS
Equipment Category #:
25
Unit B
(central office emulation)
Connector:
RJ-11C
Impedance:
600 Ω
Battery Source:
48 VDC +/- 5V
Ringing Supply:
90 Vp-p
Ring Frequency:
25 Hz
Ring Cadence:
Reproduces the cadence detected by Unit A.
Max REN:
Up to 3B
Insertion Loss:
0.0 ± 1.0 dB at 1000 Hz
(When both ports are terminated at 600 Ω )
Fiber cable — continued
SAPTF3329-105, SAPTF3329-115
SAPTF3329-106, SAPTF3329-116
1310 nm single mode
Fiber Optic Transmitter Power:
min: -13.0 dBm
max: -6.0 dBm
Fiber Optic Receiver Sensitivity:
min: -32.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
SAPTF3329-107, SAPTF3329-117
SAPTF3329-108, SAPTF3329-118
1310 nm single mode
Fiber Optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber Optic Receiver Sensitivity:
min: -33.0 dBm
max: -3.0 dBm
Link Budget:
25.0 dB
The fiber optic transmitters on this module meets Class I Laser safety requirements per
IEC-825/CDRH standards and complies with 21 CFR1040.10 and 21CFR1040.11.
19
[email protected], click the “Transition Now” link for a live Web chat.
Technical Specification
These specifications are for the model SAPTF33xx-1xx module or equivalent.
Dimensions
-105: 3.25" x 4.7" x 1.0"
(82 mm x 119 mm x 25 mm)
-
115: 3.70" x 4.7" x 1.8"
(942 mm x 119 mm x 45 mm)
Shipping Weight
1 lb.
(0.45 kg)
approximately
Power Consumption
-115: 7.0 watts; -105: 4:0 watts
Power Source
12VDC@ 1.0 amp minimum
(See note)
Power Supply
12VDC, 2 Amp, 100–240 VAC. The external AC power
supply provided with this product is UL listed by the power
supply’s manufacturer.
MTBF
41,660 hours
(MIL217F)
114,580 hours
(Bellcore)
Environment
Tmra*: 0° to 50°C
(32° to 122° F )
Storage Temp: -25° to 85°C
(-13° to 185°F)
Humidity: 5 to 95%, non-condensing
Warranty
Lifetime
The information in this user’s guide is subject to change. For the most up-to-date
information on the SAPTF33xx-1xx module, see the user’s guide on-line at:
www.transition.com
and then click on Product/Product Finder.
CAUTION: Visible and Invisible Laser Radiation when open. Do Not stare into beam
or view directly with optical instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Note:
Typically, power adapters are rated to operate at 0
°
to 40
°
C
(32° to 104°F)
and below 2000 meters. Power adapters must be derated outside these
conditions.