NEC-FXE-xx-01,100Base-FX Express Card
4
Tech Support: 1-800-260-1312 International: 00-1-952-941-7600,
(24 hours)
Cable Specifications
Fiber cable
Bit error rate:
<10-9
Single mode fiber
(recommended)
:
9 µm
Multimode fiber
(recommended)
:
62.5/125 µm
Multimode fiber
(optional)
:
100/140, 85/140, 50/125 µm
NEC-FXE-SC-01
1300 nm multimode
Fiber optic transmitter power:
min: -19.0 dBm
max: -14.0 dBm
Fiber optic receiver sensitivity:
min: -31.0 dBm
max: -14.0 dBm
Link budget:
12.0 dB
NEC-FXE-LC-01
1300 nm multimode
Fiber optic transmitter power:
min: -19.0 dBm
max: -14.0 dBm
Fiber optic receiver sensitivity:
min: -32.0 dBm
max: -14.0 dBm
Link budget:
13.0 dB
NEC-FXE-SC20-01
1310 nm single mode
Fiber optic transmitter power:
min: -5.0 dBm
max: -0.0 dBm
Fiber optic receiver sensitivity:
min: -35.0 dBm
max: -0.0 dBm
Link budget:
30.0 dB
The fiber optic transmitters on the device meet Class I Laser safety requirements per
IEC-825/CDRH standard and comply with 21CRF1040.10 and 21CRF1040.11.
[email protected] – Click the “Transition Now” link for live Web chat.
5
Technical Specifications
For models NEC-FXE-xx-01
Standards:
IEEE 802.3u, IEEE 802.3x
Data rate
100Mbps fiber media
LED:
LINK/ACT
-ON = communication link;
-FLASHING = activity on link
Data transfer node/speed:
Full duplex with NWay flow control
100Mbps speed
Software support:
• Windows 2000, 2003, XP, Vista
• Novell Netware
• Linux
• PXE & RPL Boot ROM
Bus Slot:
Express card compliant
Dimensions:
128(L) x 34(W) mm
(5.04”(L) x 1.34”W)
Weight:
0.04kg
(0.1 lb)
approximately
Power consumption:
3 watts
Ambient temperature:
0°C to 50°C
(32
°
F to 122°F)
Humidity:
5% to 90%, non-condensing
Warranty:
Lifetime
WARNING: Visible and invisible laser radiation when open: DO NOT stare into the
beam or view directly with optical instruments. Failure to observe this warning could
result in damage to your vision or blindness.
CAUTION: Use of controls, adjustments, or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Electronic emission notices
This equipment has been tested and found to comply with the limits for a class B
computing device pursuant to Subpart J of part 15 of FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a
commercial environment.
The information in this manual is subject to change without further notice.
