Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
10
BLINK
Collision of Packets occurs in the port
OFF
In Half-duplex mode
Rear Panel
The two fans, two console ports, and the 3-pronged power plugs are located at the rear
panel of 24 10/100TX plus 2 Mini-GBIC/Copper managed PoE switch shown as below.
The switch also provides one DC 48V input for the extra power connection and one DC
48V internal power supply for the power redundant. The two-console ports are for
connecting with UPS device to manage UPS device or connect with the power supply
device for managing it.
The rear panel
of the 24 10/100TX plus 2 Mini-GBIC/Copper managed PoE switch
Desktop Installation
Set the switch on a sufficiently large flat space with a power outlet nearby. The surface
where you put your switch should be clean, smooth, level and sturdy. Make sure there
is enough clearance around the switch to allow attachment of cables, power cord and
allow air circulation.
Attaching Rubber Pads
1. Make sure mounting surface on the bottom of the switch is grease and dust free.
