8
Switch
RJ-45 Ports (Auto MDI/MDIX): 7x 10/100/1000 N-way auto-sensing for
10Base-T, 100Base-TX or 1000Base-T connections.
In general, MDI means connecting to another Hub or Switch while MDIX means
connecting to a workstation or PC. Therefore, Auto MDI/MDIX would allow
connecting to another Switch or workstation without changing non-crossover or
crossover cabling.
SFP/RJ-45 combo port: The system will automatically detect which is Giga
UTP or Giga fiber. The Giga copper/Mini GBIC combo port is located on front
panel which is named as port 1 with 8 10/100/1000Base-TX ports. Giga fiber is
the mini GBIC slot that module is optional.
[NOTE]
Disconnect the Giga copper connection before installing the Mini GBIC
module. Otherwise, the switch couldn’t detect the Mini GBIC that has been
installed. While Giga copper port or Mini GBIC port is operating, only one of
them will operate.
Rear Panel
The 3-pronged power plug is located at the rear Panel of 8 10/100/1000Base-T with
1 1000Base-X SFP/RJ45 Combo port Web-Smart Switch. The switch will work with
AC voltage in the range of 100 to 240 volts / 50~60 Hz.
The Rear Panel of 8 10/100/1000Base-T with 1 1000Base-X SFP/RJ45 Combo port Web Managed
Switch
