NM2-FXS-2230-SFP-01 Install Guide
33730 Rev. B
https://www.transition.com
Page
9
of
14
Hardware Installation Procedure
1
. Remove PC cover.
2
. Gently remove the HDD Assembly. See the Dell or Wyse documentation.
3
. Remove the 15-Pin DSUB knockout.
4.
Install the M.2 NIC Assembly into Motherboard M.2 Edge Connector.
5.
Secure the M.2 NIC Assembly into place using the Securing Screw
6.
Install the Fiber Optic Adapter into the VGA opening in PC Case, as shown below.
7.
Attach to PC Case using Black SEMS Screw #6-32x1/4”, and partially tighten to hold in place as shown below.
8.
Align #4 Standoff with Top Hole in PC Case.
9.
Slip #4 Nylon Washer on top of #4 Standoff and insert #4 Screw to secure.
10.
Tighten using Black SEMS Screw #6-32x1/4”.