E-TBT-MC03 IN THE NETWORK
NOTE: AUI cable can be used to connect to the transceiver.
Using LinkAlert™
The LinkAlert™ feature allows the transceiver to pass 10BASE-T-side link faults
to the AUI side and to pass AUI-side link faults to the 10BASE-T side.
If the channel does not detect a good link on the 10BASE-T side, the transceiver
disables all transmission (including active-idle) on the AUI side AND the
STATUS LED on the transceiver blinks twice.
TECHNICAL SPECIFICATIONS
Standards
IEEE 802.3
Case Dimensions
1.65" x 3.10" x 0.94"
(42 mm x 79 mm x 24 mm)
Weight
3.4 oz. (96.5 g)
Environment
Temperature:
0-40°C (32° to 104° F )
Humidity
10-90%, non condensing
Altitude
0-10,000 feet
Power
11.4 - 16.5 VDC,
75 mA (typical), 200 mA (maximum)
Warranty
Lifetime
DECLARATION OF CONFORMITY
Name of Mfg:
Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model:
AUI/10BASE-T Transceiver
Part Number:
E-TBT-MC03
Regulation:
EMC Directive 89/336/EEC
Purpose: To declare that the E-TBT-MC03 to which this declaration refers is in
conformity with the following standards.
EMC-CISPR 22: 1985 Class A; EN 55022: 1988 Class A; EN 50082-1:1992;
EN 60950 A4:1997; IEC 801.2, IEC 801.3, and IEC 801.4; IEC 950
I, the undersigned, hereby declare that the equipment specified above conforms to the
above Directive(s) and Standard(s).
_August 11, 1999_____
Stephen Anderson, Vice-President of Engineering
Date
10BASE-T Hub
OR
OR
Hub with MII connector
SQE = ON
ST
A
TUS
RX
TX
COL
ON = OK
ST
A
TUS
RX
TX
COL
ON = OK
ST
A
TUS
RX
TX
COL
ON = OK
SQE = OFF
SQE = ON
10BASE-T
Device
Transceiver
FAR END FAULT INDICATION*
LINK FAULT INDICATION
Network
Device
