6
Tech Support: 1-800-260-1312 International: 00-1-952-941-7600 (24 hours)
CRS4Fxxxx-10x
Install the Fiber Cable
1.
Locate or build fiber cable with male, two-stranded TX to RX connectors
installed at both ends.
2.
Connect the fiber cables to the CRS4Fxxxx-100 media converter as described:
•
Connect the male TX cable connector the female TX port.
•
Connect the male RX cable connector to the female RX port.
3.
Connect the fiber cables to the other device
(another media converter, hub,
etc.)
as described:
•
Connect the male TX cable connector the female RX port.
•
Connect the male RX cable connector to the female TX port.
Connect fiber cable
to media converter
as shown.
Connect fiber cable
to other device
(media converter,
hub, etc.) as shown
RX
TX
RX
TX
[email protected] -- Click the “Transition Now” link for a live Web chat.
7
Installation
-- Continued
Install the Copper Cable
(DB-9 port)
Install the copper cable as instructed if the media converter has a
DB-9 copper port
(CRS4F31xx-10x models)
.
Note:
Shielded RS485/422 cables are required for EMC
compliance.
1.
Locate or build RS485/422 cables with a female DB-9
connector on one end and a DB-9 connector that is
compatible with the other device on the other end of the
cable.
2.
Connect the female DB-9 connector at one end of cable to the
male DB-9 port on the CRS4F31xx-10x media converter.
3.
Connect the DB-9 connector at the other end of the cable to the DB-9 port on
the other device.
Power the Media Converter
The media converter is powered through the
PointSystem™
chassis.
Install the Copper Cable
(6-position terminal block)
Install the copper cable as instructed if the media converter
has a 6-position terminal block
(CRS4F32xx-100 models).
NOTE:
Shielded RS485/422 cables are required for EMC
compliance.
1.
Locate or build RS485/422 cables with the six
individual wires stripped at both ends.
2.
Insert the individual wires at one end of cable into the
six terminal block ports on the CRS4F32xx-10x media
converter.
3.
Insert the individual wires at the other end of the cable
into the six terminal block ports on the other device,
matching the same color of cable with the number of the
port.
DB-
9
1
2
3
4
5
6
